Commands Listed in Alphabetical Order
Syntax CALibrate:RESults:FACtory?
CALibrate:RESults:SPC? (Query Only)
Returns the status of the SPC operation. This query does not initiate a SPC.
Group Calibration and Diagnostic
Syntax CALibrate:RESults:SPC?
Related Commands *CAL?
Returns INIT indicates that SPC has never successfully completed.
PASS indicates that the last SPC operation passed.
FAIL indicates that the last SPC operation failed.
RUNNING indicates that the SPC operation is running.
Examples CALIBRATE:RESULTS:SPC? returns the results of the last SPC operation: either
PASS o r FAIL.
CH<x>? (Query Only)
Returns the vertical parameters for channel <x>, where x is the channel number.
Group Vertical
Syntax CH<x>?
MSO4000 and DPO4000 Series Programmer Manual 2-117