Appendix C: Factory Defaults

Default Setup

The following table lists the default values for each command.

NOTE. Find the most up-to-date default values for your instrument and software

by performing a TekSecurecommand, saving the instrument setup and looking

at the instrument or setup le.

Table C -1: Default values

Command Default value
ACQUIRE:MAGNIVU 0
ACQUIRE:MODE SAMPLE
ACQUIRE:NUMAVG 16
ACQUIRE:NUMENV INFINITE
ACQUIRE:SAMPLINGMODE RT
ACQUIRE:STATE 1
ACQUIRE:STOPAFTER RUNSTOP
ALIAS:STATE 0
AUXIN:PROBE:FORCEDRANGE 0.00E+00
AUXIN:PROBE:GAIN 1
BUS:B1:CAN:BITRATE 500000
BUS:B1:CAN:PROBE CANH
BUS:B1:CAN:SAMPLEPOINT 50
BUS:B1:CAN:SOURCE CH1
BUS:B1:DISPLAY:FORMAT HEXADECIMAL
BUS:B1:DISPLAY:TYPE BUS
BUS:B1:FLEXRAY:BITRATE 10000000
BUS:B1:FLEXRAY:CHANNEL A
BUS:B1:FLEXRAY:SIGNAL BDIFFBP
BUS:B1:FLEXRAY:SOURCE CH1
BUS:B1:I2C:ADDRESS:RWINCLUDE 0
BUS:B1:I2C:CLOCK:SOURCE CH1
BUS:B1:I2C:DATA:SOURCE CH2
BUS:B1:LABEL Parallel
BUS:B1:LIN:BITRATE 19200
BUS:B1:LIN:IDFORMAT NOPARITY
BUS:B1:LIN:MAXBYTEDELIM 14

MSO4000 and DPO4000 Series Programmer Manual C-1