Commands Listed in Alphabetical Order
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:IRMS?
Examples POWER:QUALITY:IRMS? might return :POWER:QUALITY:IRMS 1.00
indicating that the RMS current value is set to 1.00 A.
POWer:QUALity:PHASEangle? (Query Only)
Returns the phase angle measurement.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:PHASEangle?
Examples POWER:QUALITY:PHASEANGLE? might return :POWER:QUALITY:PHASEANGLE
0indicating that the phase angle is set to 0.
POWer:QUALity:POWERFACtor? (Query Only)
Returns the power factor measurement.
Conditions This command requires a DPO4PWR application module.
Group Power
Syntax POWer:QUALity:POWERFACtor?
Examples POWER:QUALITY:POWERFACTOR? might return
:POWER:QUALITY:POWERFACTOR 1.0 indicating that the power factor is
set to 1.0.
2-278 MSO4000 and DPO4000 Series Programmer Manual