Commands Listed in Alphabetical Order
BUS:B<x>:RS232C:DATABits
Sets or returns the number of RS-232 data bits for bus <x>, where x is the bus
number.
Conditions This command requires a DPO4COMP application module.
Group Bus
Syntax BUS:B<x>:RS232C:DATABits {7|8}
BUS:B<x>:RS232C:DATABits?
Arguments 7specifies seven bits in the RS-232 data frame.
8specifies eight bits in the RS-232 data frame.
BUS:B<x>:RS232C:DELIMiter
Sets or returns the RS-232 delimiting value for a packet on bus <x>, where x
is the bus number.
Conditions This command requires a DPO4COMP application module.
Group Bus
Syntax BUS:B<x>:RS232C:DELIMiter {NULl|LF|CR|SPace|XFF}
BUS:B<x>:RS232C:DELIMiter?
Arguments NULl specifies 0x00.
LF specifies 0x0A.
CR specifies 0x0D.
XFF specifies 0xFF.
BUS:B<x>:RS232C:DISplaymode
Sets or returns the display mode for the bus <x> display and event table, where x
is the bus number.
MSO4000 and DPO4000 Series Programmer Manual 2-103