Tektronix DPO4000, MSO4000 MSO4000 and DPO4000 Series Programmer Manual 2-51

Command Groups
Table 2-31: Trigger Commands (cont.)
Command Description
TRIGger:A:BUS:B<x>:FLEXray:HEADER:CYCLEcount Sets or returns the cycle
count portion of the binary
header string
TRIGger:A:BUS:B<x>:FLEXray:HEADER:FRAMEID Sets or returns the frame id
portion of the binary header
string
TRIGger:A:BUS:B<x>:FLEXray:HEADER:INDBits Sets or returns the indicator
bits portion of the binary
header string
TRIGger:A:BUS:B<x>:FLEXray:HEADER:PAYLength Setsor returns the payload
length portion of the binary
header string
TRIGger:A:BUS:B<x>:I2C:ADDRess:MODe Sets or returns the I2C
address mode to 7 or 10-bit
TRIGger:A:BUS:B<x>:I2C:ADDRess:TYPe Sets or returns the I2C
address type to USER
TRIGger:A:BUS:B<x>:I2C:ADDRess:VALue Sets or returns the binary
address string used for the
I2C trigger
TRIGger:A:BUS:B<x>:I2C:CONDition Sets or returns the trigger
condition for I2C trigger
TRIGger:A:BUS:B<x>:I2C:DATa:DIRection Sets or returns the I2C
trigger condition valid on a
READ, WRITE, or either
TRIGger:A:BUS:B<x>:I2C:DATa:SIZe Setsor returns the length of
thedatastringinbytestobe
used for I2C trigger
TRIGger:A:BUS:B<x>:I2C:DATa:VALue Setsor returns the binary
datastringusedforI2C
triggering
TRIGger:A:BUS:B<x>:LIN:CONDition Sets or returns the trigger
condition for LIN
TRIGger:A:BUS:B<x>:LIN:DATa:HIVALue Setsor returns the binary
datastringtobeusedforLIN
trigger
TRIGger:A:BUS:B<x>:LIN:DATa:QUALifier Setsor returns the LIN data
qualifier
TRIGger:A:BUS:B<x>:LIN:DATa:SIZe Setsor returns the length of
thedatastringinbytestobe
used for LIN trigger
TRIGger:A:BUS:B<x>:LIN:DATa:VALue Setsor returns the binary
data string
TRIGger:A:BUS:B<x>:LIN:ERRTYPE Sets or returns the error type
MSO4000 and DPO4000 Series Programmer Manual 2-51