Commands Listed in Alphabetical Order
Arguments LESSThan sets the oscilloscope to trigger when the data is less than the qualifier
value.
Than sets the oscilloscope to trigger when the data is than the qualifier value.
EQUal sets the oscilloscope to trigger when the data is equal to the qualifier value.
UNEQual sets the oscilloscope to trigger when the data is not equal to the qualifier
value.
LESSEQual sets the oscilloscope to trigger when the data is less than or equal
to the qualifier value.
EQual sets the oscilloscope to trigger when the data is than or equal to the
qualifier value.
Examples TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIER LESSTHAN sets the oscilloscope
to trigger when the data is less than the qualifier value.
TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIER? might return
:TRIGGER:A:BUS:B1:CAN:DATA:QUALIFIER THAN, indicating that the
oscilloscope is set to trigger when the data is than the qualifier value.
TRIGger:A:BUS:B<x>:CAN:DATa:SIZe
Sets or returns the length of the data string in bytes for a CAN trigger if the
condition is DATAor IDANDDATA. Applies to bus <x>, where x is the bus
number.
Conditions This command requires a DPO4AUTO application module.
Group Trigger
Syntax TRIGger:A:BUS:B<x>:CAN:DATa:SIZe <NR1>
TRIGger:A:BUS:B<x>:CAN:DATa:SIZe?
Arguments <NR1> is the length of the data string in bytes.
TRIGger:A:BUS:B<x>:CAN:DATa:VALue
Sets or returns the binary data string to be used for a CAN trigger if the trigger
condition is ID or IDANDDATA. Applies to bus <x>, where x is the bus number.
Conditions This command requires a DPO4AUTO application module.
MSO4000 and DPO4000 Series Programmer Manual 2-399