Commands Listed in Alphabetical Order
Syntax SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition
{SS|STARTofframe|MISO|MOSI|MISOMOSI}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition?
Related Commands BUS:B<x>:SPI:IDLETime,BUS:B<x>:SPI:FRAMING
Arguments SS specifies a search based on the Slave Selection condition.
STARTofframe is applicable when BUS:B<x>:SPI:FRAMING is set to
IDLEtime. When the trigger condition is set to STARTofframe,theinstrument
triggers on the first SPI clock after an idle time when there are no clocks.
MISO specifies a search based on the Master-In Slave-Out condition.
MOSI specifies a search based on the Master-Out Slave-In condition.
MISOMOSI specifies a search based on the Master-In Slave-Out and Master-Out
Slave-In conditions.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa{:MISO|:IN}:VALue
Sets or returns the binary data string for an SPI trigger search if the search
condition is MISO or MISOMOSI. SEARCH<x> is the search number and B<x>
is the bus number.
Conditions This command requires a DPO4EMBD application module.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa{:MISO|:IN}:
VALue <bin>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa{:MISO|:IN}:
VALue?
Arguments <bin> is the data string in binary format.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:DATa{:MOSI|:OUT}:VALue
Sets or returns the binary data string for an SPI trigger search if search the
condition is MOSI, or MISOMOSI. SEARCH<x> is the search number and B<x>
is the bus number.
2-360 MSO4000 and DPO4000 Series Programmer Manual