Commands Listed in Alphabetical Order
Arguments B1 specifies the Bus 1 source.
B2 specifies the Bus 2 source.
B3 specifies the Bus 3 source.
B4 specifies the Bus 4 source.
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe
Sets or returns the slope for an edge trigger search to determine where to place a
mark. <x> is the search number.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe {RISe|FALL}
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SLOpe?
Arguments RISe specifies a rising edge.
FALL specifies a falling edge.
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce
Sets or returns the source waveform for an edge trigger search to determine where
to place a mark. <x> is the search number.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce
{CH1|CH2|CH3|CH4|MATH}
SEARCH:SEARCH<x>:TRIGger:A:EDGE:SOUrce?
Arguments CH<x> specifies one input channel as the edge source, where <x> is the channel
number.
MATH specifies the math waveform as the search source.
SEARCH:SEARCH<x>:TRIGger:A:LEVel
Sets or returns the level for an edge trigger search to determine where to place a
mark. <x> is the search number.
2-362 MSO4000 and DPO4000 Series Programmer Manual