Commands Listed in Alphabetical Order
Arguments HIGH specifies the logic high.
LOW specifiesthelogiclow.
Xspecifies a "don’t care" state.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE
Sets or returns whether the clock edge is a rising or falling for a logic search to
determine where to place a mark. <x> is the search number.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE
{FALL|RISe}
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:EDGE?
Arguments RISe specifies a rising edge.
FALL specifies a falling edge.
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce
Sets or returns the clock source definition for a logic trigger search. <x> is the
search number. If a clock source is defined, then the logic search is determined by
the state of the other inputs at the clock transition. If no clock source is defined,
then the logic search is determined only by the state of the inputs.
Group Search
Syntax SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce
{CH1|CH2|CH3|CH4|MATH|REF|NONe}
SEARCH:SEARCH<x>:TRIGger:A:LOGIc:INPut:CLOCk:SOUrce?
Arguments CH<x> specifies a channel input as the clock source, where <x> = 1, 2, 3, or 4.
MATH specifies the math waveform as the clock source.
REF specifies the reference waveform as the clock source.
NONe specifies no clock source.
MSO4000 and DPO4000 Series Programmer Manual 2-365