Tektronix DPO4000, MSO4000 BUS:B<1-4>:AUDio:WORDSel:POLarity, BUS:B<1-4>:AUDio:WORDSel:SOUrce

Commands Listed in Alphabetical Order
Syntax BUS:B<1-4>:AUDio:TYPe {I2S|LJ|RJ|TDM}
BUS:B<1-4>:AUDio:TYPe?
Arguments I2S specifies I2S audio format.
LJ specifies left-justified audio format.
RJ specifies right justified audio format.
TDM specifies time-division multiplexing audio format.
Examples BUS:B1:AUDIO:TYPE RJ sets right-justified as the audio format.
BUS:B1:AUDIO:TYPE? might return :BUS:B1:AUDIO:TYPE I2S indicating
that the audio format is set to I2S.
BUS:B<1-4>:AUDio:WORDSel:POLarity
Sets or returns the word select polarity for the AUDIO bus.
Conditions This command requires DPO4AUDIO application module.
Group Bus
Syntax BUS:B<1-4>:AUDio:WORDSel:POLarity {NORMal|INVERTed}
BUS:B<1-4>:AUDio:WORDSel:POLarity?
Arguments NORMal specifies positive WORDSel polarity.
INVERTed specifies negative WORDSel polarity.
Examples BUS:B1:AUDIO:WORDSEL:POLARITY NORMal sets normal as the word select
polarity.
BUS:B1:AUDIO:WORDSEl:POLARITY? might return
:BUS:B1:AUDIO:WORDSEL:POLARITY NORMAL indicating that the word select
polarity is set to normal.
BUS:B<1-4>:AUDio:WORDSel:SOUrce
Sets or returns the word select source waveform for the AUDIO bus.
Conditions This command requires DPO4AUDIO application module.
2-90 MSO4000 and DPO4000 Series Programmer Manual