AT&T 555-230-520 manual ANI and II-Digits Routing7, ANI Routing

ANI and II-Digits Routing7

Introduction

ANI and ii-digits allow you to make vector routing decisions based on the caller identity and the type of the originating line.

Command Set

ANI and ii-digits are both used for conditional branching with the goto step. The following table illustrates the commands used in ANI/II-Digits Routing .

Table 7-1. ANI/II-Digits Routing Command Set

Command
Category	Action Taken	Command
BRANCHING/	Go to a vector step.	goto step
PROGRAMMING	Go to another vector.	goto vector

ANI Routing

ANI routing allows you to make routing decisions based on incoming or internal caller identity. In this way, calls from a particular customer can receive unique routing, local calls can be routed differently from long distance calls, or calls from different geographical areas can receive different routing. See "ANI Routing Example" later in this section for more information. ANI also can be compared against entries in a Vector Routing Table. See "Vector Routing Tables with ANI" later in this section for more information.

Issue 4 September 1995 7-1