Call Vectoring Commands
A-14 Issue 4 September 1994
Command Directory
The manual pag e directory in this section list s a n d d i sc u ss es a ll of the
commands used within Call Vectoring. For each command presented, the
following is provided: purpose, syntax, valid entries, requirements, an exam ple,
description of the command’s operation, answer supervision considerations,
feature interactions, and CMS/BCMS interactions. The following p oints
concerning the appearance of the command line are in effect:
Data that must be entered as part of the command line is shown in bold.
Variable fields that (in most cases) must be completed are enclo sed in

< >

.
Optional fields are enclosed in [ ] .
NOTE:
If a variable field appears within an optional field, an entry for the variable
field appears only if the optional field is included during command
execution.
NOTE:
If EAS is enabled, ‘‘skill’’ replaces “split.”