AT&T 555-230-520 manual V4 Feature Availability

V4 Feature Availability L

The following lists describe vectoring enhancements that are available with G3V4 and later releases. For a detailed description of any item see the referenced section of this guide.

When V4 has been installed on your switch as a bugfix (that is, a maintenance load), but you have not purchased V4 software capabilities you receive:

■Enhanced vector editing capabilities. See "Enhanced Vector Editing (G3V4 and later releases)" on page 2-5.

■The ability to route-to number with coverage. See "Route-to Command" on page A-69.

■The ability to include “*” and “#” in the route-to number field. "Route-to Command" on page A-69.

■The ability to use “active” instead of “none” keyword for the messaging split/skill command. See "Messaging Command" on page A-61.

■Addition of the i-silent keyword to the wait-timecommand for use with the adjunct routing ADR/Lookahead Interflow applications. See "Wait-time Command" on page A-79.

■Vector initiated Service Observing. See "Service Observing" on page 4-16.

When you have purchased V4 but have not purchased additional V4 enhancements, in addition to the bugfix enhancements you receive:

■The ability to pass ANI to CMS for inclusion in the CMS call record

■The ability to use “latest” keyword for the messaging split/skill command. See "Messaging Command" on page A-61.

Issue 4 September 1994 L-1