AT&T 555-230-520 manual Table A-1. Command Description/Reference Table

Call Vectoring Commands

Command Description/Reference

The following table provides a brief description of the function of each of the Call Vectoring command. Also included is the page where the command is described in full.

Table A-1. Command Description/Reference Table

Command	Function	Page
adjunct routing	To request adjunct to route call.	page A-15
announcement	To connect caller to delay recording.	page A-22
busy	To connect caller to busy tone.	page A-24
check-backup split	To connect/queue call on a conditional	page A-26
(skill)	basis.
collect digits	To prompt caller for digits.	page A-31
converse-on split	To deliver a call to a converse split (skill)	page A-35
(skill)	and to activate a Voice Response Unit
	(VRU).
disconnect	To force disconnect of call with optional	page A-46
	announcement.
goto step	To cause unconditional/conditional	page A-48
	branch to another step in the vector.
goto vector	To cause unconditional/conditional	page A-54
	branch to another vector.
messaging split	To allow caller to leave message for	page A-61
(skill)	callback.
queue-to main split	To connect/queue call to the primary	page A-65
(skill)	split (skill).
route-to	To connect call to destination entered via	page A-69
	collect digits command, or to connect
	call to internal/external destination.
stop	To stop further vector processing.	page A-77
wait-time	To initiate feedback to caller and delay	page A-79
	processing of the next step.

A-2Issue 4 September 1994