AT&T 555-230-520 manual Call Vectoring Commands

Call Vectoring Commands

Table A-11.	Call Vectoring Command Success/Failure Criteria
			Vector Processing
Command		Success/Failure Criteria	Disposition
queue-to main split		Fails if any of the following are true:	Continue vector
		■ Split’s queue is full.	processing with the
			next sequential step.
		■ Split is not vector-controlled.
		■ Call is already queued at the specified
		priority to the specified split.
		■ Call is already queued to three
		different splits.
		Otherwise:
		Succeeds, and the call is terminated to an	Exit vector
		agent.	processing, and
			pass control to call
			processing.
		Succeeds, and the call is queued or	Continue vector
		requeued in the specified split at the	processing with the
		specified priority.	next sequential step.
stop		Always succeeds.	Exit vector
			processing. Control
			is passed to normal
			call processing. Any
			queuing or treatment
			in effect remains in
			effect. Call is
			dropped if not
			queued.
wait-time		Always succeeds.	Connect the specified
			treatment and pass
			control to the delay
			timer. Any feedback
			is continued until
			other feedback is
			provided.

NOTE:

Complete operational details for the route-tocommands are provided in Appendix G.

A-86Issue 4 September 1995