Glossary

Split Summary report

A report that summarizes the call activity for an entire split. It can be generated by CMS as well as in BCMS.

split supervisor

An ACD split manager who monitors split flows.

staffed

For ACD splits, staffed connotes an agent being logged in. Therefore, when an agent is staffed in an ACD split, this means that the agent is present. However, the term does not indicate if the agent is available to receive calls. When an agent logs in initially, the agent is in Auxiliary Work mode and does not receive calls until the agent becomes available by entering either Auto-in or Manual-in mode.

For non-ACD hunt groups, staffed connotes administered.

super agent pool

A backup skill hunt group of agents that is able to handle any type of call coming into the switch. EAS must be enabled for this pool to be in effect.

T

tandem switch configuration

A LAI call setup that consists of three switches, including the sending switch, the tandem switch, and the far end switch.

The sending switch determines whether the call should be sent to the tandem switch, which, in essence, is the first receiving switch. The tandem switch contains a route-tocommand that is executed on a look ahead basis in the same manner as the sending switch.

If the far end switch (in essence, the second receiving switch) accepts the call, the sending switch is notified, and call control is passed to the far end switch. If the call is denied, the next step of the tandem switch vector is executed.

touch-tone digit code

An alphabetic or numeric code entered by pressing one or more selected buttons on a touch-tone dialing pad. It can be entered from within the customer's network or via a touch-tone telephone external to the network.

touch-tone receiver

A device required to accept the touch-tone digits that are entered by users of the Call Prompting feature.

tracking

Identifies various split flows and other actions relevant to call handling.

treatment

A service provided to the customer or other action taken by call vectoring in response to the customer's placing a call. Examples are: playing an announcement, providing a delay with background music, playing a busy tone, disconnecting a call.

TTR

See Touch-Tone Receiver (TTR).

GL-12Issue 4 September 1995

Page 443
Image 443
AT&T 555-230-520 manual GL-12Issue 4 September