AT&T 555-230-520 manual Functional Differences for G2 and G3 Call Vectoring and Ease

Functional Differences for G2 and G3

Call Vectoring and EASE

Introduction

This appendix provides the Call Vectoring functional differences between the Generic 2 and Generic 3 switches. This information should prove helpful to system administrators who administer networks that utilize both switches.

The appendix is organized into three sections. The first section indicates differences between the Call Vectoring commands common to both the Generic 2 and Generic 3 switches. The second section consists of a table that indicates general Generic 2 and Generic 3 differences within Call Vectoring. Finally, the third section indicates differences between the two switches in defining and/or interpreting split flows.

NOTE:

Call Prompting is not supported on G2.

Differences in Command Function

The following sections indicate the differences between the Generic 2 and Generic 3 switch versions of the Call Vectoring commands. The commands discussed include the following:

■queue-to main split

■check-backup split

■goto step

■goto vector

■route-to number

Issue 4 September 1995 E-1