AT&T 555-230-520 manual Queue-to Main Split and Check-Backup Split

Functional Differences for G2 and G3 Call Vectoring and EAS

■announcement

■wait-time

■busy

Queue-to Main Split and Check-Backup Split

The queue-to main split command queues the call to the specified main split and assigns a queuing priority level.

The check-backup split command checks the status of a split for possible termination of the call to that split. When termination is not possible, queuing at the specified priority is attempted. Termination and/or queuing is attempted if the split meets certain conditions that are specified as part of the command.

E-2Issue 4 September 1995