AT&T 555-230-520 manual Wait-time, Busy, Table E-5. G2/G3 Differences for Wait Command

Differences in Command Function

Wait-time

This command sets a length of time for a call to wait in the queue. The command also specifies one of the following treatments while the call advances in the queue(s):

■Silence

■Ringing

■Music

■I-silent (G3V4 and later releases)

■Alternate Audio/Music Source (G3V4 and later releases)

Table E-5. G2/G3 Differences for Wait Command

GENERIC 3	GENERIC 2
The system-wide music-on-hold	A separate music option is available
feature must be active for music	for Call Vectoring.
treatment on the command.
With G3V4 and later releases, an
alternate audio/music source can be
administered for a wait-timestep.

Busy

This command terminates vector processing and gives the caller a busy signal.

Table E-6. G2/G3 Differences for Busy Command

GENERIC 3 GENERIC 2

A timeout after 45 seconds is provided.

A 20 second timeout is provided for both CO and non-CO trunks.

Issue 4 September 1995 E-7