AT&T 555-230-520 manual Table A-11. Call Vectoring Command Success/Failure Criteria

Call Vectoring Commands

Table A-11. Call Vectoring Command Success/Failure Criteria

			Vector Processing
Command	Success/Failure Criteria		Disposition
adjunct routing	Fails if any of the following are true:		Stop wait-time or
		VDN’s COR does not permit routing to	announcement step
	■		(if present). Then
		the adjunct-supplied destination.
			continue vector
	■	TAC/ARS/AAR code is invalid.	processing with the
			next sequential step.
	■ Specified agent is not logged into the
		specified split for a direct agent call.
	■ Local extension is not in the dialplan.
	■ Invalid number was dialed.
	Otherwise, succeeds.		Route the call and
			provide feedback.
announcement	Fails if specified announcement is		Continue vector
	unadministered, not recorded, or busied		processing with the
	out.		next sequential step.
	Otherwise, succeeds.		Play the
			announcement, then
			continue at the next
			sequential step.
busy	Always succeeds. (CO without answer		Exit vector
	supervision trunk callers will not hear the		processing, then
	busy tone.)		play the busy tone
			for 45 seconds before
			dropping the call.
			(Unanswered CO
			trunk calls receive 45
			seconds of ringback.)

A-82Issue 4 September 1995