Commands Listed in Alphabetical Order
Examples MEASUREMENT:IMMED:DELAY:DIRECTION FORWARDS starts searching from the
beginning of the waveform record and looks for the first rising or falling edge.
MEASUREMENT:IMMED:DELAY:DIRECTION? might return
:MEASUREMENT:IMMED:DELAY:DIRECTION BACKWARDS indicating
that searching begins at the end of the waveform record and looks for the last
rising or falling edge.
MEASUrement:IMMed:DELay:EDGE<x>Sets or returns the slope of the edge the oscilloscope uses for the delay "from" or
"to" waveform when taking an immediate delay measurement.
Group Measurement
Syntax MEASUrement:IMMed:DELay:EDGE<x> {FALL|RISe}
MEASUrement:IMMed:DELay:EDGE<x>?
Related Commands MEASUrement:IMMed:SOUrce
MEASUrement:IMMed:SOUrce2
Arguments <x> specifies which waveform to use, where <x> = 1 is the "from" waveform, and
<x>=2isthe"to"waveform.
FALL specifies the falling edge.
RISe specifies the rising edge.
Examples MEASUREMENT:IMMED:DELAY:EDGE1 RISE specifies that the "from" waveform
rising edge be used for the immediate delay measurement.
MEASUREMENT:IMMED:DELAY:EDGE1? returns either RISE or FALL.
MEASUrement:IMMed:SOUrce[1]Sets or returns the source for all single source immediate measurements
and specifies the source to measure "from" when taking an immediate delay
measurement or phase measurement.
NOTE. If you do not specify a numerical suffix,thesourceisassumedtobe
SOURCE 1.
2-208 MSO4000 and DPO4000 Series Programmer Manual