Index
IN-26
Cisco Prime Network 4.0 User Guide
OL-29343-01
service properties
NRI 25-38
session management 25-39
view properties 25-32
S-GW
commands
create QCI-QOS mapping 25-138
create S-GW 25-138
create S-GW PLMN 25-47
delete S-GW 25-47
modify S-GW 25-47
overview 25-46
view properties 25-46
shared switching entities 12-40
Shutting Down, VNE investigation state 2-22
sites, viewing properties 18-27
SNMP
configuration commands
add SNMP configuration
remove SNMP configuration
update SNMP configuration
traps commands
add traps 1-7
enable CFM SNMP server traps 15-18
enable traps command 1-7
remove traps command 1-7
software images (device). See Image Management
SONET
channelization properties 20-18
commands
clear SDH counter 20-53
configure BER threshold 20-53
configure clock source 20-53
configure TCA threshold 20-53
show BER threshold 20-53
show controller data 20-53
show PM line counters 20-53
show PM medium counters 20-53
show PM path counters 20-53
show PM section counters 20-53
show PM trace details 20-53
show TCA threshold 20-53
See also TDM and channelization commands
Spanning Tree Protocol. See STP
startup config
file copy from FTP/TFTP 1-10
file copy to FTP/TFTP 1-10
show command 1-10
write memory command 1-10
static link, adding 6-15
Stopped, VNE investigation state 2-22
STP
in VLAN domain views 12-66
in VLAN overlays 12-66
links (in VLAN overlays) 12-66
properties, viewing 12-10
root badge 3-9, A-22
VLAN service links 12-67
stream control transmission protocol 25-155
Structure-Agnostic TDM over Packet. See SAToP
subscriber access points (BNG)
diagnosing 24-6
viewing 24-5
subscriber commands
create subscribers
delete subscriber
modify subscriber
show subscriber 25-138
switching entities
containing termination points 12-50
overview 12-46
syslogs
syslog host logging (command) 1-9
Syslog tab (in Prime Network Events) 8-7
System tab (events) 8-6