12-118
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services
Viewing OSPF Properties
Table 12-49 OSPF Processes in Logical Inventory
Field Description
OSPF Process Details
Process ID Unique process identifier.
Router ID Router IP address.
OSPF Version OSPF version: v1, v2, or v3.
SPF Timers
Schedule Delay Number of milliseconds to wait after a change before calculating the shortest path first (SPF).
Min Hold Time Minimum number of milliseconds to wait between two consecutive SPF calculations.
Max Wait Time Maximum number of milliseconds to wait between two consecutive SPF calculations.
OSPF Neighbors Table
Neighbor ID OSPF neighbor IP address.
Area OSPF area identifier.
Interface Address IP address of the interface on the neighbor configured for OSPF.
State State of the communication with the neighbor: Down, Attempt, Init, 2-Way, Exstart, Exchange,
Loading, and Full.
OSPF Interface Hyperlinked entry to the OSPF Interface Properties window.
The OSPF Interfaces window displays the same information as the OSPF Interfaces Table below.
OSPF Interfaces Table
IP Interface OSPF interface, hyperlinked to the relevant entry in the routing entity IP Interfaces table in logical
inventory.
For more information about the IP Interfaces table, see Tab le 1 8-12 .
Internet Address OSPF interface IP address.
Area ID OSPF area identifier.
Priority Eight-bit unsigned integer that specifies the priority of the interface. Values range from 0 to 255. Of
two routers, the one with the higher priority takes precedence.
Cost Specified cost of sending a packet on the interface, expressed as a me tric. Values range from 1 to
65535.
Status State of the interface: Up or Down.
State OSPF state: BDR, DR, DR-Other, Waiting, Point-to-Point, or Point-to-Multipoint.
Network Type Type of OSPF network: Broadcast, Nonbroadcast Multiple Access (NBMA), Point-to-Multipoint,
Point-to-Point, or Loopback.
DR Address Designat ed router IP ad dress.
BDR Address Backup designated router IP address.