12-17
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services Viewing Resilient Ethernet Protocol Properties ( REP)
The following topics describe how to view REP properties related to VLANs:
• VLAN domain views and overlays—See Viewing REP Information in VLAN Domain Views and
VLAN Overlays, page 12-63.
• VLAN service link properties—See Viewing REP Properties for VLAN Service Links, page 12-64.
Table 12-9 REP Segment Properties
Field Description
Segment ID Segment identifier.
Segment Complete Whether the segment is complete; that is, that no port in the segment is
in a failed state: True or False.
Segment Ports Table
Port Hyperlinked entry to the port in physical inventory.
Port State Current operational link state of the REP port: None, Init Down, No
Neighbor, One Way, Two Way, Flapping, Wait, or Unknown.
Port Type Port type: Primary Edge, Secondary Edge, or Intermediate.
Port Role Role or state of the REP port depending on its link status and whet her it
is forwarding or blocking traffic: Failed, Alternate, or Open.
Remote Device Name Name of the neighbor device that this port is connected to on this
segment. This value can be null.
Remote Port Name Name of the neighbor port on the neighbor bridge that this port is
connected to on this segment. This value can be null.
Blocked VLANs VLANs that are blocked on this port.
Configured Load
Balancing Blocked
VLANs
List of VLANs configured to be blocked at this port for REP VLAN load
balancing.
Preemptive Timer Amount of time, in seconds, that REP waits before triggering
preemption after the segment is complete. The entry can ran ge from 0 to
300, or be Disabled.
The value Disabled indicates that no time delay is configured, and that
the preemption occurs manually.
This property applies only to REP primary edge ports.
LSL Ageout Timer Using the Link Status Laye r (LSL) age-out timer, the amount of time, in
milliseconds, that the REP interface remains up without receiving a
hello from a neighbor.
Remote Device MAC MAC address of the neighbor bridge that this port is connected to on this
segment. This value can be null.