10-28
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 10 Working with Reports
Generating Reports
Device Selection
Select Devices Note
• You can add only those devices that are within your scope.
• A user with the Administrator role can select unmanaged devices (by IP
address) for reports that run on the Event Archive.
• The Detailed Event Count (by device) report accepts a maximum of
1000 devices.
Select devices to include in the report:
1. Click Select Devices.
2. Click Add.
3. In the Add Network Element dialog box, select devices using eithe r of
the following methods:
–
To select devices that meet specific criteria, click Search and enter
the required criteria.
–
To select from all network elements, click Show All.
4. In the list of displayed elements, select the network elements that you
want to include in the report. You can select multiple network elements
at a time.
5. Click OK.
All Devices This field does not appear for all reports.
Click All Devices to include all devices in your scope in the report.
Severity
Severity This field does not appear for all reports.
Check the check boxes of the syslog message severities to be included in the
report: All, Critical, Major, Minor, Warning, Cleared, Information, and
Indeterminate.
Detailed Service Events Report—Additional Report Specifications
Description Contains Enter the string that the service event must contain to be included in the
report.
Detailed Syslogs Report—Additional Report Specifications
Syslogs Description This field is displayed if you choose Fault DB for the data source.
In the Description Contains field, enter the string that the syslog must
contain to be included in the report.
Syslogs Raw Data This field is displayed if you choose Event Archive for the data source.
In the Raw Data Contains field, enter the string that the syslog raw data must
contain to be included in the report.
Table 10-18 Detailed Network Events Reports - Run Report Dialog Box Fields (continued)
Option Description