12-21
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services Viewing Access Gateway Properties
Table 12-11 describes the information that is displayed for an access gateway.
Step 3 Choose an access gateway instance to view instance properties.
Figure 12-8 shows an example of the information displayed for an access gateway instance.
Table 12-11 Access Gateway Properties in Logical Inventory
Field Description
Group Name Access gateway group name.
Group Type Group type: MSTAG or REPAG.
Interface Properties
Interface Hyperlink to the interface in physical inventory on which access
gateway is configured.
Config Name Name of the MSTP region.
The default value is the MAC address of the switch, formatted as a
text string using the hexadecimal representation specified in IEEE
Standard 802.
Max Age In seconds, the maximum age for the bridge.
Values range from 6 to 40 seconds.
Provider Bridge Whether the current instance of the protocol is in 802.1ad mode:
True or False.
Bridge Address Bridge identifier for the interface.
Port Identifier Port identifier for the interface.
External Cost External path cost on the current port.
Values range from 1 to 200000000.
Config Revision Number of the configuration revision.
Hello Time Current hello time (in seconds)
Port Active Whe ther or not th e port is ac tive: True or False.
BPDUs Sent Number of BPDUs sent.
Reversion Control Enabled Whether reversion control is enabled: True or False.