13-7
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 13 Monitoring Carrier Grade NAT Properties Configuring CG NAT Service
Note You might be prompted to enter your device access credentials while executing a command. Once you
have entered them, these credentials will be used for every subsequent execution of a command in the
same GUI client session. If you want to change the creden tial s, clic k E dit Credentials. The Edit
Credentials button will not be available for SNMP commands or if the command is scheduled for a later
time.
Command Navigation Description
Add Static Port
Forwarding Configure > To configure CG NAT service instance for
static port forwarding.
Add NAT 64
Forwarding Configure > To configure CG NAT service instance for
NAT 64.
Add 6rd Forwarding Configure > To configure CG NAT service instance for
6rd.
Static Port Forwarding Delete > Click Execute Now to remove CG NAT
instance.
Pool Utilization Show > Display the CGN instance name, inside
VRF name, start and end address