12-76
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services
Working with Ethernet Flow Point Cross-Connects
Adding EFP Cross-Connects
To add an EFP cross-connect to a map:
Step 1 In Prime Network Vision, select the map to which you wish to add the cross-connect.
Step 2 Open the Add EFP Cross-Connect dialog box in one of the following ways:
• Choose File Add to Map > Cross Connect.
• In the toolbar, click Add to Map and choose Cross Connect.
Step 3 In the Add EFP Cross Connect to domain dialog box, select the required EFP cross-connect and cl ic k
OK.
The map is refreshed and displays the newly added EFP cross-conn ect .
Viewing EFP Cross-Connect Properties
To view EFP cross-connect properties in Prime Network Vision, do either of the following:
• Select the EFP cross-connect with the properties you want to vie w, and choose Node > Properties.
• Double-click the device configured with an EFP cross-connect and, in the inventory window, choose
Logical Inventory > Local Switching > Local Switching Entity.
The information that is displayed for EFP cross-connects is the same in both the Local Switching Entry
Properties window and in the Local Switching Table in logical inventory (as shown in Figure 12-41).