Cisco Systems 4 Viewing T3 DS1 and DS3 Channelization Properties

20-21
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services Viewing Channelization Properties
Viewing T3 DS1 and DS3 Channelization Properties
To view T3 DS1 and DS3 channelization properties:
Step 1 In Prime Network Vision, right-click the required device, then choose Inventory.
Step 2 Choose Physical Inventory > Chassis > slot > subslot > T3-interface.
Figure 20-11 shows DS1 channelization properties for T3 in physical inventory.
Low Order Path Tab
Description Description of the low order path down to the T1 level, including the
channel types (such as STS-1, VTG, or VT) and channel allocated.
Physical Port Hyperlinked entry to the port in physical inventory.
Channelization Channelization that occurs through the path, such as
STS1-> VTG-> VT15.
Admin Status Administrative status of the path.
Oper Status Operational status of the path.
Clocking Source of the clocking mechanism: Internal or Li ne.
Supported Alarms Tab
Name Supported alarm.
Enable Whether the alarm is enabled or disabled.
Table 20-12 SONET/SDH High Order Path Properties (continued)
Field Description