12-122
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services
Configuring IS-IS
Command Navigation Description
Create ISIS
Interface ISIS > System > right-click
Process ID in content pane >
Commands > Configuration >
Use these command to create or modify an
IS-IS routing process and assign it to a
specific interface, rather than to a
network.
Modify ISIS
Interface
Delete ISIS
Interface
ISIS > expand System > select a
Process > select Interfaces tab>
right-click on a Interface Name >
Commands > Configuration >
Create ISIS Address
Family
Modify ISIS
Address Family
Delete ISIS Address
Family
ISIS > System > right-click
Process ID in content pane >
Commands > Configuration
Configure or modify IS-IS routing to use
standard IP Version 4 (IPv4) and IP
Version 6 (IPv6) address prefixes.
Create ISIS
Interface Address
Family
Modify ISIS
Interface Address
Family
Delete ISIS
Interface Address
Family
ISIS > expand System > select a
Process > select Interfaces tab>
right-click on a Interface Name >
Commands > Configuration >
Configure IS-IS routing to use standard IP
Version 4 (IPv4) and IP Version 6 (IPv6)
address prefixes on an interface.
Show ISIS
Configuration ISIS > right-click System >
Commands > Show The show isis command displays general
information about an IS-IS instance and
protocol operation.