Cisco Systems 4 Using an MPLS-TP Tunnel Endpoint

11-13
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 11 Using Cisco PathTracer to Diagnose Problems Launching Path Tracer
Figure 11-7 Path Information Dialog Box for a Network Pseudowire
Step 3 Specify the destination using the information in Table 11-4.
Step 4 To limit the number of hops for the path trace, check the Stop trace after check box, and enter the
maximum number of hops for the path trace.
The Cisco PathTracer window appears, displaying the resulting path trace.
Using an MPLS-TP Tunnel Endpoint
To launch a path trace from an MPLS-TP tunnel endpoint:
Step 1 In the navigation pane or map pane, expand the required MPLS-TP tu nnel .
Step 2 Right-click the required MPLS-TP tunnel endpoint and choose PathTracer > From H ere to
Destination.
The Path Information dialog box is displayed as shown in Figure 11-8.