18-11
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services Working with MPLS-TP Tunnels
Viewing LSPs Configured on an Ethernet Link
A single Ethernet link can support a number of LSPs. Prime Network Vision enables you to v iew all
LSPs on a single Ethernet link and to identify the source and destination labels.
To view LSPs configured on an Ethernet link:
Step 1 In the map view, right-click the required link and choose Properties.
Step 2 In the link properties window, choose the required Ethernet link.
The link properties window refreshes and displays the Labels button as shown in Figure 18-5.
Protect LSP Number Number assigned to the protected LSP. By default, the working LSP
number is 0 and the protected LSP number is 1.
BFD Template BFD template associated with this MPLS-TP tunnel.
Working LSP BFD State Configured state of the working LSP BFD template: Up or Down.
Protect LSP BFD State Configured state of the protected LSP BFD template: Up or Down.
Working LSP Fault OAM Indicates that a fault has been detected on the working LSP.
Protect LSP Fa ult OAM Indicates that a fault has been detected on the protected LSP.
Tunnel Name Tunnel name.
Adjacent Hyperlink to the adjacent endpoint in logical inventory.
Table 18-4 MPLS-TP Tunnel Properties Window (continued)
Field Description