4-24
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 4 Device Configurations and Software Images
Device Configurations
Note Edited files are restored only in merge mode. If you are restoring to startup mode on the devices
ASR 901, ASR 903, and MWR2941, the restore procedure i s perfo rm ed on overwrite mode .
Step 4 If you want to edit a file before restoring it, click Edit Config (edited files are restored only in merge
mode). You can view the details of the selected configuration file in the Configuration Editor page as
shown in Figure 4-7.
Note If you selected non-Cisco devices, the Edit Config button is disabled.
Figure 4-7 Configuration Edit
Edit the configuration lines, as required. Note the following:
• To remove a command, add no in front of the command.
• To update a command, add no in front of the command and then add the new command.
Step 5 Click Restore. The Config Restore Schedule dialog box opens.
Step 6 (Optional) Override the default transport protocol and default restore mode.
Step 7 Enter a comma-separated list of e-mail ID(s) to which to send a notification after the scheduled restore
job is complete.