25-140
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies
Mobile Technologies Commands: Summary
Create GGSN Context >
Commands >
Configuration
Gateway GPRS Support Node (GGSM) is the gateway between
the GPRS wireless data network and other external packet data
networks such as radio networks, IP networks, or private
networks. GGSN provides network access to external hosts
wishing to communicate with mobile subscribers (MS).
Use this command to create a GGSN service.
Create GTPP GPRS Tunneling Protocol Prime (GTPP) is used for
communicating accounting messages to CGs.
Use this command to create a GTPP service.
Create GTPU GTPU carries user data within the GPRS core network and
between the radio access network and the core network. The user
data transported can be packets in any of IPv4, IPv6, or PPP
formats.
Use this command to create a GTPU service.
Create IP Pool An IP pool is a sequential range of IP addresses within a certain
network.
Use this command to create an IP Pool.
Create P-GW PDN Gateway (P-GW) is the node that terminates the SGi
interface towards the PDN. If a UE is accessing multiple PDNs,
there may be more than one P-GW for that UE.
Use this command to create a P-GW.
Create
QCI-QOS
Mapping
The QoS Class Index (QCI) to QoS mapping configuration mode
is used to map QCIs to enforceable QoS parameters.
Use this command to create a QCI-QOS Mapping.
Create S-GW A Serving Gateway (S-GW) acts as a demarcation point between
the Radio Access Network (RAN) and core network, and
manages user plane mobility.
Use this command to create a S-GW.
Create VRF Virtual routing and forwarding (VRF) is a technology included in
IP (Internet Protocol) network routers that allows multiple
instances of a routing table to exist in a router and work
simultaneously.
Use this command to create a VRF.
Delete Context Use this command to delete a context under the Logical Inventory
node.
Modify
License Use this command to modify the license information.
Command Navigation Description