15-7
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 15 Monitoring Ethernet Operations, Administration, and Maintenance Tool Properties Viewing Connectivity Fault Management Properties
Figure 15-3 CFM Maintenance Domain Properties
Table 15-5 describes the information that is displayed for CFM maintenance domains.
Step 5 To view the properties for a maintenance association’s endpoints, do one of the following:
• Choose Logical Inventory > CFM > domain > association.
• In the Maintenance Associations table, double-click the requi red a ssoci ation .
Table 15-5 CFM Maintenance Domain Properties
Field Description
Maintenance Domain Name Name of the domain.
Level Level at which the domain is managed: 0-7.
ID Optional maintenance domain identifier.
Maintenance Associations Table
Name Name of the maintenance association.
Association Type Maintenance association type.
Direction Direction of the maintenance association: Up or Down.
Continuity Check Whether or not the continuity check is enabled: True or False.
Continuity Check Interval Interval (in seconds) for checking continuity.
Associated Entity Bridge, port, or pseudowire that the maintenance association uses
for CFM. Click the hyperlinked entry to view the item in inventory.
Cross Check Whether or not cross checking is enabled: True or False.
Maximum MEPs Maxi mum num ber of maint enance endpo ints (ME Ps) that ca n be
configured on the maintenance association.
Inner VLAN Inner VLAN identifier.