10-30
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 10 Working with Reports
Generating Reports
Table 10-19 Detailed Non-Network Events Reports - Run Report Dialog Box Fields
Option Description
Report Settings
Report Name Enter a unique name for the report, from 1 to 150 ch ara cters i n leng th.
Report names cannot include the following characters: ;?<>/:\"#*|.
Description Enter a brief description of the report.
Report Security This field is displayed only if report sharing is enabled in Prime Network
Administration.
Indicate the level of security for the report by clicking the appropriate
option:
• Private—The report can be viewed and used only by the report creator
and the administrator.
• Public—The report can be viewed and used by all other users, regardless
of whether the devices are listed in the report are in the user’s scope.
Note You can share reports with others only if sharing is enabled in Prime
Network Administration. For more information, see the Cisco Prime
Network 4.0 Administrator Guide.
Date Selection
Last Specify the length of time before the current date and time, and the unit of
measure: seconds, minutes, hours, days, weeks, or months.
From Date
To Da t e
Specify the date range for the report:
1. Click From Date.
2. In the From date field, enter the start date for the time period, or click
the drop-down arrow to select the start date from a calendar.
3. Enter a time for the start date, using the format HH MM SS.
4. In the To Date field, enter the end date for the time period, or click the
drop-down arrow to select the end date from a calendar.
5. Enter a time for the end date, using the format HH MM SS.
Severity
Severity Check the check boxes of the syslog message severities to be included in the
report: All, Critical, Major, Minor, Warning, Cleared, Information, and
Indeterminate.
Detailed Audit Events Report—Additional Report Specifications
Description Contains Enter the string that the event must contain to be included in the report.
Command Name
Contains Enter the string that the command name must contain to be included in the
report.
Originator IP Contains Enter the string that the originating IP address must contain to be included
in the report.
User Name Contains Enter the string that the username must contain to be included in the report.