20-28
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Viewing MLPPP Properties
Table 20-16 describes the information that is displayed in the MLPPP Properties window.
Table 20-16 MLPPP Bundle and Member Properties
Field Description
MLPPP MLPPP bundle name, hyperlinked to MLPPP in logical inventory.
Name MLPPP interface name.
Group Group to which the MLPPP bundle belongs.
Active Link Number of active interfaces participating in MLPPP.
Admin Status Administrative status of the MLPPP bundle: Up or Down.
Operational Status Operational status of the MLPPP bundle: Up or Down.
LCP Status Link Control Protocol (LCP) status of the MLPPP bundle: Closed,
Open, Started, or Unknown.
Minimum Configured
Link Minimum number of configured links for an MLPPP bundle.
Maximum Configured
Link Maximum number of configured links for an MLPPP bundle.
Bandwidth Bandwidth allocated to the MLPPP bundle.
MTU Size of the M aximum Transmission Unit (MTU), from 1 to 2147483647
bytes.
Keepalive Status of the keepalive function: Set, Not Set, or Unknown.
Keepalive Time If keepalive is enabled, the amount of time, in seconds, to wait before
sending a keepalive message.
Interleave Enabled Whether or not interleaving of small fragments is enabled.
Fragment Disable Whether fragmentation is enabled or disabled: True or False.
Fragment Delay Maximum size, in units of time, for packet fragments on an MLPPP
bundle. Values range from 1 to 999.
Fragment Maximum Maximum number of MLPPP bundle fragments.
Keepalive Retry Number of times that the device sends keepalive packets without
response before closing the MLPPP bundle protocol. Values range from
2 to 254.
Load Threshold Minimum load threshold for the MLPPP bundle. If the traffic load falls
below the threshold, the link is removed.