10-29
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 10 Working with Reports Generating Reports
Detailed Traps Report—Additional Report Specifications
Traps Detailed
Description In the Description Contains field, enter the string that the trap mu st co nt ain
to be included in the report.
Long Description This option is enabled if you choose Fault DB for the data source.
1. Check the Show Long Description check box to include the long
description in the report.
2. In the Long Description Contains field, enter the string that the long
description must contain to be included in the report.
SNMP Version Specify the SNMP versions to include in the report: All, 1, 2, or 3.
Generic This option is enabled if you choose Event Archive for the data source .
Specify the generic traps to include in the report:
1. Select the generic traps to include in the report:
–
All—Include all generic traps
–
0—coldStart
–
1—warmStart
–
2—linkDown
–
3—linkUp
–
4—authenticationFailure
–
5—egpNeighborLoss
–
6—enterpriseSpecific
2. If you select generic type 6, enter the OIDs (comma separated) in the
Vendor Specific field.
The Vendor Specific field accepts a maximum of 125 digits.
Table 10-18 Detailed Network Events Reports - Run Report Dialog Box Fields (continued)
Option Description