13-3
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 13 Monitoring Carrier Grade NAT Properties Viewing Carrier Grade NAT Properties in Logical Inventory
The Carrier Grade NAT properties are displayed in logical inventory as shown in Figure 13-1.
Figure 13-1 Carrier Grade NAT in Logical Inventory
Table 13-3 describes the Carrier Grade NAT properties that are displayed.
Table 13-3 Carrier Grade NAT Properties in Logical Inventory
Field Description
CGN Name Name of the Carrier Grade NAT service.
Preferred Location Tab
Preferred Location Hyperlinked entry to the card in physical inventory.
Preferred Location (alias) Location of module in clear text.
Location Type Configured type of location: Active or Standby.
Redundancy Status Redundancy state: Online or Offline.
If the field is empty, it means the data was not collected from the
device.
Service Infra Interface Hyperlinked entry to the routing entity in logical inventory.
For more information about routing entities in logical inventory , see
Viewing Routing Entities, page 18-31.