20-7
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services Viewing Virtual Connection Properties
To view ATM virtual connection cross-connects:
Step 1 In Prime Network Vision, right-click the required device, then choose Inventory.
Step 2 Open the VC Cross Connect table in either of the following ways:
• In the inventory window, choose Logical Inventory > VC Switching Entities > VC Switching
Entity. The Cross-Connect Table is displayed in the content pane as shown in Figure 20-4.
• In the inventory window:
a. Choose Physical Inventory > Chassis > Slot > Subslot > Port .
b. Click the Show Cross Connect button.
The VC Cross Connections window is displayed and contains the same information as the
Cross-Connect Table in logical inventory.
Step 3 Select an entry and scroll horizontally until you see the required information.
Figure 20-4 ATM Virtual Connection Cross-Connect Properties
Table 20-3 identifies the properties that are displayed for ATM VC cross-connects .