Cisco Systems 4 User Roles Required to View IP and Multicast Configurations, Viewing the Multicast Configurations

19-2

Cisco Prime Network 4.0 User Guide

OL-29343-01

Chapter 19 Viewing IP and MPLS Multicast Configurations

User Roles Required to View IP and Multicast Configurations

User Roles Required to View IP and Multicast Configurations

This topic identifies the roles that are required to work with IP and Multicast Support. Prime Network

determines whether you are authorized to perform a ta sk as fo llows:

• For GUI-based tasks (tasks that do not affect elements), authorization is based on the default

permission that is assigned to your user account.

• For element-based tasks (tasks that do affect elements), authorization is based on the default

permission that is assigned to your account. That is, wheth er the element is in one of your assigned

scopes and whether you meet the minimum security level for that scope.

For more information on user authorization, see the topic on device scopes in th e Cisco Prime Network

4.0 Administrator Guide.

Viewing the Multicast Configurations

This topic contains the following sections:

• Viewing Multicast Node, page 19-2

• Viewing Multicast Protocols, page 19-4

• Multicast Label Switching, page 19-10

• Multicast Routing Entities, page 19-10

To view the Multicast node:

Step 1 Right-click on the required device and choose the Inventory option.

Step 2 In the Inventory window, choose Logical Inventory > Multicast. The Route Policies and Multicast

Global Interfaces tabs are displayed in the content pane as show in Figure 19-1. You can click on the tabs

to view more details.

Table 19-1 Default Permission/Security Level Required for IP and Multicast Support

Task Viewer Operator OperatorPlus Configurator Administrator

View multicast configuration details X X X X X

View Multicast Label Switch details X X X X X

View Routing entities X X X X X

View VRF Properties X X X X X