18-7
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 18 Monitoring MPLS Services Working with MPLS-TP Tunnels
For more information about LSP redundancy service, see Viewing LSP Endpoint Redundancy Service
Properties, page 18-14.
Viewing MPLS-TP Tunnel Properties
Prime Network Vision discovers and displays MPLS-TP attributes in the MPLS-TP branch in logical
inventory as described in this topic.
Additional information about MPLS-TP tunnel properties are available in the following branches:
• Routing Entities—See Viewing Routing Entities, page 18-31.
• LSEs—See Viewing Label Switched Entity Properties, page 18-39.
• Pseudowires— See Viewing Pseudowire End-to-End Emulation Tunnels, page 18-50.
To view MPLS-TP tunnel properties:
Step 1 Right-click the required device in Prime Network Vision and choose Inventory.
Step 2 In the logical inventory window, choose Logical Inventory > MPLS-TP > MPLS-TP Global.
The routing information is displayed as shown in Figure 18-3.
Figure 18-3 MPLS-TP Tunnel Properties in Logical Inventory
Table 18-3 describes the information that is available for MPLS-TP tunnels. The information that is
displayed depends on the configuration.