20-42
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Network Clock Service Overview
Step 3 To view additional CEM group properties, double-click the required CEM group.
Table 20-23 describes the information displayed in the CEM Group Properties window.
Table 20-22 Virtual CEM Group Properties
Field Description
CEM Interface Name CEM interface name.
CEM Group Table
CEM Group Name of the virtual CEM group.
Framing Framing mode used for the CEM channel:
• Framed—Specifies the channels used for the controller , such as
Channels: (1-8), (10-14). The channels that are available
depend on the type of controller: T1, E1, T3, or E3.
• Unframed—Indicates that a single CEM channel is used for all
T1/E1 timeslots. SAToP uses the unframed mode.
Pseudowire Name of the pseudowire configured on the CEM interface,
hyperlinked to the pseudowire properties in logical inventory.
Oper Status Operational status of the CEM interface:
• Dormant—The interface is dormant.
• Down—The interface is down.
• Not Present—An interface component is missing.
• Testing—The interface is in test mode.
• Unknown—The interface has an unknown operational status.
• Up—The interface is up.
Admin Status Administrative status of the CEM interface:
• Down—The CEM interface is administratively down.
• Testing—The administrator is testing the CEM interface.
• Unknown—The administrative status is unknown.
• Up—The CEM interface is administratively up.