20-32
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 20 Monitoring MToP Services
Viewing MPLS Pseudowire over GRE Properties
Table 20-18 describes the information included in the Tunnel Edges table specifically for MPLS
pseudowire tunnels over GRE.
Step 4 To view GRE Tunnel properties, choose Logical Inventory > GRE Tunnels.
Figure 20-18 shows the Tunnel Edges table that is displayed for GRE tunnels.
Table 20-18 MPLS Pseudowire over GRE Properties
Field Description
Pseudowire Type Type of pseudowire relevant to MToP:
• ATM AAL5 SDU—ATM with ATM Adaptation Layer 5
(AAL5) service data units.
• ATM n-to-one VCC—ATM with n-to-one virtual channel
connection (VCC).
• ATM n-to-one VPC—ATM with n-to-one virtual path
connection (VPC).
• CESoPSN Basic—CESoPSN basic services with CAS.
• SAToP E1—SAToP on an E1 interface.
Local MTU Size, in bytes, of the MTU on the local interface.
Remote MTU Size, in bytes, of the MTU on the remote interface.
Preferred Path Tunnel Path to be used for MPLS pseudowire traffic.
Click the hyperlinked entry to view the tunnel details in logical
inventory.