12-63
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services Working with VLANs
Viewing VLAN Service Link Properties
See the following topics for information on viewing VLAN service link properties:
• Viewing REP Properties for VLAN Service Links, page 12-64
• Viewing STP Properties for VLAN Service Links, page 12-67
• Viewing Associated Network VLAN Service Links and VLAN Mapping Properties, page 12-57
Viewing REP Information in VLAN Domain Views and VLAN Overlays
You can view REP segment and port information in Prime Network Vision in the map view. The icons
displayed depend on whether you view the REP information in the VLAN domain view or in a VLAN
overlay. Table 12-28 describes the icons and badges used to represent REP segment and port
information.
Table 12-28 REP Icons and Badges in VLAN Domain Views and Overlays
Item Description VLAN Domain View VLAN Overlay
REP identifier—Uses the
format REP-id where id
represents the REP segment
identifier. The REP identifier is displayed in
the domain view if the visual link
represents only one link.
f the visual link represents more
than one link, no REP identifier is
displayed.
The REP identifier is displayed in a
VLAN overlay view if all the links
represented by the visual link are
from the same source to the same
destination.
REP No Neighbor
segment— Indicates that
the specified segment has
no neighbor.
REP identifier for incorrect
configuration—Indicates
that the two sides of the link
are configured differently
or incorrectly.