11-9
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 11 Using Cisco PathTracer to Diagnose Problems Launching Path Tracer
Using an IP Interface
Both IPv4 and IPv6 addresses are supported as valid path trace sources and destinations as illustrated in
the following procedure.
To launch a path trace from an IP interface:
Step 1 In logical inventory, right-click the required IP interface (Logical Inventory > Routing
Entities > Routing Entity > ip-interface).
The right-click menu displays IPv4 and IPv6 options. These options are enabled or dimmed, depen di ng
on whether the IP interface has an IPv4 address, an IPv6 address, or both IPv4 and IPv6 addresses. See
Figure 11-3.
Figure 11-3 IP Interface Path Trace Launch Point - Right-Click Menu
Step 2 Choose PathTracer > From Here to Destination.
The Path Information dialog box is displayed as shown in Figure 11-4.