25-57
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies LTE Networks
You can also view the following configuration details for a HSGW service:
Setup Timeout The maximum amount of time (in seconds) allowed for session setup.
Context Retention
Timeout The maximum number of tim e (i n se co nds) t hat the UE sessi on context is
maintained by the HSGW service before it is to rn d own.
Note The UE session context includes the Link Control Protocol (LCP) ,
authentication and the A10 session context for a given UE.
Maximum
Retransmission The maximum number of times the HSGW service will try to communicate
with the eAN or PCF before it declares it as unreachable.
Network Initiated QoS Indicates whether the Network Initiated QoS feature is supported by the
HSGW service.
Unauthorized Flow QoS
Timeout The amount of time (in seconds) the service must wait before a QoS update
is triggered to downgrade an unauthorized flow.
SPI tab
SPI Number The unique Security Parameter Index (SPI) number, which indicates a
security context between the services.
Remote Address The IP address of the source service, which can be an IPv4 dotted decimal
notation or IPv6 colon separated notation.
Zone ID The PCF zone id that must be configured for the HSGW service.
Netmask The subnet mask of the service.
Hash Algorithm The hash algorithm used be tween the s our ce a nd desti nat ion ser vices .
Time Stamp Tolerance The difference (tolerance) in timestamps that is acceptable. If the actual
difference in the timestamps exceeds this difference, then the session is
rejected.
Replay Protection The replay-protection scheme that must be implemented by the service.
Description The description of the SPI.
PLMN tab
PLMN ID The unique id of the Public Land Mobile Network (PLMN), which is used to
determine if a mobile station is visiting, roaming, or belongs to the network.
Primary Indicates whether the PLMN Id must be used as the default and primary ID.
Overload Policies tab
IP Address The IP address of an alternate PDSN, which is in the IPv4 dotted decimal
notation.
Weight The weightage of the IP address, which determines the order in which the IP
address is used in case of multiple IP addresses.
Table 25-31 HSGW Service details (continued)
Field Description