25-47
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 25 Monitoring Mobile Technologies LTE Networks
Step 3 If the S-GW is associated with PLMNs, you can view the PLMN entries on clicking the specified S-GW .
S-GW Commands
The following commands can be launched from the inventory by right-clicking a n S-W and ch oosin g
Commands > Configuration.
The table below lists the S-GW commands. Additional commands may be available for your devices.
New commands are often provided in Prime Network Device Packages, which can be downloaded f rom
the Prime Network software download site. For more information on how to download and install DPs
and enable new commands, see the information on “Adding Additional Device (VNE) support” in the
Cisco Prime Network 4.0 Administrator Guide.
Before executing any commands, you can preview them and view the results. If desired, you can also
schedule the commands. To find out if a device supports these commands, see the Cisco Prime Network
4.0 Supported Cisco VNEs.
Table 25-27 S-GW Properties in Logical Inventory
Field Description
Service Name Name of the S-GW service.
Service Status Status of the S-GW service.
Accounting Context Name of the context configured on the system that process es ac co un ting for
service requests handled by the S-GW service.
Accounting GTPP
Group Name of the accounting GTPP group ass ociated with the S-GW service. This
will hold the configured GTPP server group (for GTPP servers redundancy)
on a S-GW service for CGF accounting functionality.
Accounting Mode Accounting protocol, which could be GTPP or Radius-Diameter.
Egress Protocol Egress protocol used for the S-GW service, which coul d be GTP, GTP-PMIP,
or PMIP.
Ingress EGTP Service Ingress EGTP service associated with the S-GW. EGTP provides tunneling
support for the S-GW.
Egress Context Context used for S-GW service egress.
Egress ETGP Service Ingress EGTP service associated with the S-GW. EGTP provides tunneling
support for the S-GW.
Egress Mag Service Mobile Access Gateway (MAG) egress service through calls are routed to
the S-GW.
IMS Authorization
Service IMS authorization service associated with the S-GW.
Accounting Policy Accounting policy configured for the S-GW.
New Call Policy Specifies if the new call related behavior of S-GW service is enabled or
disabled, when duplicate sessions with same IP address request is received.
QCI QoS Mapping
Table Table name of QoS cla ss in di ces th at en for e QoS p ar amet ers .
SAE GW Service Systems Architecture Evolution (SAE) gateway service associated with the
S-GW.