26-41
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 26 Monitoring Data Center Configurations Viewing the Storage Area Network Support Details
Note For more information about the alarms relating to FC and FCoE, see the Cisco Prime Network 4.0
Supported Service Alarms.
Viewing the FC Interface Details
To view the FC Interface details:
Step 1 In Prime Network Vision, right-click the required device and choose the Inventory option.
Step 2 In the Inventory window, expand the Physical Inventory node.
Step 3 Select Chassis > Module Slot > Fibre channel interface. The FC interface details are displayed in the
content pane.
Table 26-14 describes the FC configuration details.
Oper Port Mode The operational port mode of the port.
Allowed VSANs The VSANs that are active and allowed to receive data f or th e sp ecified
VSAN range. The port will allow traffic for the VSANs specified here.
Native VSAN The VSAN ID to which the FC port belongs.
Virtual Interface The VFC ID, which is displayed only if the VFC is configured to a port
and the port is bound to a VF.
Fibre Channel The fibre channel associated to the VSAN.
FCS Database Entries tab
Local Interface Name The name of the local interface for VSAN.
Local Connected
Interface The local interface connected to the VSAN.
Local Port The name of the local port for the VSAN.
Remote Port The name of the remote port for the VSAN.
Remote Node The remote node f or th e V SA N.
Remote Permanent Port The name of the remote permanent port.
Remote Node IP
Address The IP address of the remote node.
Remote Port Name The name of the remote port.
Table 26-13 VSAN Configuration Details (continued)
Field Name Description