12-41
Cisco Prime Network 4.0 User Guide
OL-29343-01
Chapter 12 Monitoring Carrier Ethernet Services Viewing EVC Service Properties
Figure 12-18 EVC Port Properties in Physical Inventory
Table 12-22 describes the information displayed for these properties.
Table 12-22 EVC Port Properties in Physical Inventory
Field Description
Storm Control and Monitoring Properties Area
Storm Control Status of storm control on the port: Enabled or Disabled.
Port Monitoring Status Status of port monitoring:
• Enabled—The switch sends keepalive messages on user network
interfaces (UNIs) and enhanced network interfa ces (E NIs) an d does
not send keep alive messages on network node interfaces (NNIs).
• Disabled—The switch does not send keepalive messages.
Port Monitoring Interval Keepalive interval in seconds. The default value is ten seconds.
Storm Control Level Representing a percentage of the total available bandwidth of the port,
the threshold at which additional traffic of the specified type is
suppressed until the incoming traffic falls below the threshold.
Storm Control Type Type of storm the port is configured for protection fro m: Bro adcast,
Multicast, or Unicast.